> Metalworking > Cold Saws > Wilton
Microprocessor control
Manually cuts from 0-45 degrees left and up to 45 degrees right
Head can be tilted from 0 to 45 degrees left
Regulation of the head stroke, according to the dimensions of material which has to be cut, is programmed from the control panel
Check panel with LEDS for machine functions are on the control panel
Rotating table mounted on bearing for a smooth and precise rotation
Fixed mechanical stops at 0 degrees and 45 degrees left and right for quick head positioning
Manually cuts from 0-45 degrees left and up to 45 degrees right
Head can be tilted from 0 to 45 degrees left
Table is mounted on bearing for a smooth and presses rotation
Fixed mechanical stops at 0 degrees and 45 degrees left and right for quick head positioning
Screw locking system to lock the head at any degree
Steel base
Exhaust chute
Mist lubricator for blade
State-of-the-art Microprocessor control
Head can be manually positioned from 0-45 degrees left to 0-45 degrees right
Head can be tilted from 0 to 45 degrees left for Compound Angle Cuts
Regulation of the head stroke, both up and down, according to the dimensions of material, may be programmed from the control panel
Control Panel with LEDS for all machine functions
Miter Positioning Rotating table mounted on bearings for smooth and precise rotation
Fixed mechanical stops at 0 degrees and 45 degrees left and right for quick head positioning
Ideally suited for metal cutting with an infinitely variable speed range from 90 to 340 SFPM
Blade speed and pitch selector
Variable speed drive system
Adjustable carbide blade guides
Largest cast iron tilting table
LED SFPM readout