• The axial sleeve and
movable jaw are cast in one
single piece
• Allowable tolerance
between the axial sleeve and
center bar is 0.002"
• The manner in which the
center slide bar is
connected to the axial
sleeve assures an even 360°
contact
• Much more accurate and
stable than the traditional
screw and cross plate means
of attaching the movable jaw
to the vise bed |
 |
|
• Clamps different
thicknesses of materials
• Maximum opening of 2" on
both sides
• For 90 degree, "IL1 and
"T" joints
• For gluing, framing,
nailing, holding, and
screwing
• Lead screw for high-torque
clamping |
 |
|